Shenzhen Mealink Electronic Co. Ltd

Model Number: YLCSD02 Key Specifications/Special Features: I. Introduction:The SDI to AV scalar converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown on CRT or HDTV while ensuring high-bit rates of 2.970Gbps to give you fast signal transmission without any lossFor professionals this means that it is now easier to distribute and extend your 3G SDI signal while giving you the ability to display your work on TV thanks to the built-in this converterFurthermore, thanks to the loop-through 3G-SDI design, users are able to enjoy both SDI and AV at the same timeII. Features:Operating at 2.970, 2.970/1.001, 1.485, 1.485/1.001Gbps and 270Mbps

Equalized and re-clocked loop output

Auto video mode detection (3G/HD/SD)

Conversion from SMPTE 425M level-B to level-A 1m080P 50/59.94/60 4:2:2 10-bit

Connect with other units to extend your signal over long distances

Simultaneous display with SDI/AV signals

Alternative audio output to analog 2CH

Supports signal transmission distances of up to 300M for SD signals, 200M for HD signals and 100M for 3G signals

Note: cable tested with Belden 1694A, operating distances may vary if used with another type of cable
III. Package:

• 3G SDI to AV scalar converter
• 5V DC power supply adaptor
• Operating manual

IV. Specifications:

• SMPTE standard: 425M level-A and B, 424M, 292M, 259M-C
• SDI transmission rates: 2.970 and 2.970/1.001Gbps
• SDI-in/out resolution: SD:480i at 60, 576i at 50, HD: 720P at 50/60, 1080i at 50/60, 3G: 1,080P at 24/25/29.97/30/50/59.94/60
• CVBS output resolution: PAL/NTSC-M
• Input port: 1 x BNC (SD/HD/3G-SDI)
• Output port: 1 x BNC (SD/HD/3G-SDI), 3 x RCA (CVBS, L/R)
• Power supply: 5 - 12VDC
• ESD protections: human body model ±8kV (air-gap discharge), ±4kV (contact discharge)
• Dimensions: 95 x 60 x 25mm
• Weight: 260g
• Operating temperature: 0 - 40°C
• Storage temperature: -20 - 60°C/-4 - 140°F
• Humidity: 20 - 90% RH (non-condensing)
• Power consumption: 5W (maximum)